| |
 |
| Enter
your details below and we'll keep you informed about the latest
products and services available from NEL |
| |
| |
For
details of Thermostatic Printing® products please visit the
Key-Tech website.
|
|
Neltec®
provides electrical heating elements and a complete thermal management
solution for surface heating substrates.
By combining etched foil heaters and thermal protection systems
with heatsink design, Neltec® produce fully assembled and
functionally tested heater units. Alternatively, a simple
flexible heater mat can be supplied in any shape and almost
any size, voltage and wattage with lead assemblies and connectors.
These innovative Neltec® etched foil heaters incorporate:
• High precision etched metal
foil technology which allows electrical resistance control beyond
the industry standards.
• Thermostat, thermal fuse or
thermistor control and protection.
• Polyimide heaters, available
in low moisture retention polyimide dielectric.
• Kapton
heaters, use Kapton® dielectric supplied by DuPont.
• Polyester
heaters, available in optical grade polyester dielectric.
• Silicone
rubber heaters, available in a variety of silicone rubber
dielectric constructions including wearpad applications
• Environmentally secure
multi-layer construction with operating temperature
range from -195°C to
+230°C.
• Simple or complex shapes
in a wide range of sizes engineered to bond direct to
any surface or to custom heatsink assemblies.
• Prototype and production
quantities with rapid prototyping service available within
48 hours.
• Special applications available
in other insulating materials (e.g. nomex) and wire wound
resistors.
Data
sheet:
| Supply
Voltage |
0-240V.
For other voltages please contact Neltec® |
| Insulation
Material |
Polyester |
Polyimide(Kapton) |
Silicone
Rubber |
| Operating
Temperature |
-55
to +105°C |
-195 to +150°C |
-60
to +230°C |
| Max.
Wattage |
2.0- 3.0
W/cm2 |
5.0
W/cm2 |
8.0
W/cm2 |
| Overall
Thickness |
150µ |
125µ |
1000µ |
| Flexibility
Rating |
High |
Very
High |
Medium |
| Flammability
Rating |
Flame
retardant material systems to UL94 V-O available. |
| Thermal
protection |
On board thermal fuse, thermostat and thermistor devices are
available as part of your thermal management solution. |
|
Lead Wires |
22 awg, high temperature PTFE insulation to BS 2G210. Operating
Temperature range -55°C to +200°C. Other specifications
available on request. |
| Heatsink
Assemblies |
Heaters
assembled with pressure sensitive adhesive or directly bonded
to metal heatsinks. |
| Installation |
Detailed
installation instructions provided. |
| Approvals |
UL,
CE Marking, BS EN ISO 9001:2000.
Product
manufactured to EN 60335-1 and EN 60950 specifications.
|
© 2009 NEL Technologies Limited. All rights reserved
|
|
|
|
